Hi guys,
What is the best way to achieve automatic failover between DR and HQ cluster? Can't seem to get a way to achieve this.
↧
Hyper-V automatic failover
↧
Windows 2012 R2- Hyper-V server migration to Windows 2016- Hyper-V server
I have one stand alone 2012 R2 Hyper-V server which runs 6 VMs on it. No cluster No replication enabled even don't have shared storage. I need to upgrade this server to 2016 server and enable replication with another 2016 hyper-V server. I plan to copy
existing VHDX files and create new VMs with old VHDX files that I copied on a new server 2016 Hyper-V. So my question, Will my existing VHDX files will be supported to the VMs that I'm going to create on server 2016 Hyper-V and Did I miss anything?
↧
↧
Hyper-v Failover win server 2016 best practice
Hi all,
We are planning to create a hyper-v cluster on two identical Dell PowerEdge R740 Server with 256 GB of memory.
My questions is what's the best practice to create the cluster ?
Regarding
-Networks
-Quorum Disk size
- Performance of Server Memory - CPU
and if there any thing else should i take care about
Thanks in advance
IT Helpdesk
↧
Deploying SBC environment on Windows Server Hyper-V
Hello all,
What exactly does it mean to build an SBC environment using RDVH and RDSH in a Windows Server Hyper-V environment? Is this possible? Isn't it possible that the implications of VDI and SBC are indistinguishable?
Assuming that you have created a collection of Unmanaged Pool-style VMs that have installed the programs that users need on Windows Server 2016 servers and are used by domain users, is this an SBC? VDI?
Hopefully, many of you would leave your thinking, opinion or idea.
↧
HyperV PXE over ipv4
Hello, i got that problem with my virtual machine, but dont know how to fix. Im really bad at these things. But i need to create a virtual machine. My vm is generation 2
↧
↧
Hyper-v
Hello,
I have a server 2012 machine set up with Hyper-V installed.
I would like to have some users have access to use (not modify hardware etc) some vm's (not all of the vm's)
The Users may access their vm's simultaneously.
Users would ideally be able to stop/start/restart their vm's.
The users can either be local or obtained from an already-existing Active Directory.
How can i assign the user rights for the vm's, and what do i need present on the user's PC's?
Thanks
↧
Maximum Virtual Memory Support in VM of Win2K16 Hyper-v
What is the maximum virtual memory support available in W2K16 per VM?
↧
How can I have VM from different domain in CSV of Hyper-v Cluster
My company has one AD DS forest that contains 2 domains. All servers run Windows Server 2K12 R2. My company uses ISCSI and Fibre channel storage. I plan to deploy single Hyper-v cluster that will use Cluster shared volumes (CSV). The cluster must include VM's from both domains.What should I do?
Join each hyper-v host server to the same AD DS domain or | |
Deploy clustered storage spaces or | |
Deploy serially attached SCSI (SAS) or | |
Join each hyper-v host server to different AD DS domains. |
↧
Nested Hyper-V
I have a test server (Dell Poweredge R710) running Hyper-V Server 2016. Is it possible to run nested Hyper-V on this (i.e. Hyper-V running within a VM on the server)? The CPUs are 2 x Xeon E5506 @ 2.13GHz.
When I try, I get a message saying 'the processor does not have the required virtualisation capabilities' but I am unsure whether this is an actual hardware limitation (which it might be, given that this is a fairly old server), or just requires a settings change in the firmware.
Thanks
David
↧
↧
Hyper-V Virtual Network Switch - Missing SIP traffic
SIP traffic is mirrored in a switch and sent to both a PBX and a standalone server, which hosts our call recording software. The standalone server is old and we intend to replace it with a Server 2016 virtual machine (Hyper-V).
When the Ethernet cable (mirrored SIP traffic) is moved from the existing server to the VM, SIP traffic is dropped / not found (WireShark) - return the cable to the existing server and the SIP traffic is present. If the same cable is connected to a laptop the SIP traffic is visible in WireShark.
Both Antivirus and Firewall have been disabled on the VM. The virtual network switch is configured as External and allows network/internet connectivity i.e. ping google.com and browse websites etc.
Any help would be appreciated, thank you
Philip
↧
Snapshot applied / "The trust relationship between this workstation and the primary domain failed"
I applied a newer snapshot in the snapshot tree for one of our Win2008 vms. After applying the snapshot, I now get this error upon trying to login into the VM console:
"The trust relationship between this workstation and the primary domain failed."
Note, the machine was already in the domain in the old and new snapshots so not sure why it has AD problems after applying the snapshot. Please advise.
↧
Can I replicate between two servers in different domains?
Hello,
I've done replications between servers all the time - sometimes they aren't on the same subnet but never between two domains - first time - not sure if there is something different I need to do.
I have two servers each host running 2016 (and all guest VMs are 2016). I have set up a trust between the two and conditional forwarders. I can ping each server by name.
I have the hyperV settings set for kerberos. I've disabled all firewalls on both servers - there areNO firewall policies, rules, or anything else between the two domains. All firewalls are disabled.
When I set up a replication from one host to other using kerberos, I get these two messages
event 3200 Hyper-V failed to enable replication for virtual machine 'Test': A connection with the server could not be established (0x00002EFD). (Virtual machine ID 71EFDF26-BD0D-4C85-81FB-6C6918AA036E)
THis is the setting on the server I'm replicating from -
These are settings on the server I'm replicating to -
event 29230 Hyper-V cannot connect to the specified Replica server 'HOST1'. Error: A connection with the server could not be established (0x00002EFD). Verify that the specified server is enabled as a Replica server, allows inbound connection on port '443', and supports the same authentication scheme.
↧
Hyper V replication between different domain
Dears
how we can step by step make hyper v replication between tow hyper 2012 R2 servers on different domain controller?
↧
↧
Checkpoints files created randomly-2
i facing this issue with an production machine.
Checkpoints (AVHDX) files created randomly and the cause unknown and led to disk space issue
please advise.
Also merging checkpoints failed automatically and for fix it we must power-off machine but it raised again after days
↧
Error with Synthetic Ethernet Port
Hello,
I'm trying to create a new VM associated to an external network adapter on Hyper-V RC0. At the end of creation, the VM tries to start but two messages appear on the host machine and the VM disappears (sorry, I use the french version of Windows Server 2008 RTM) :
Virtual Machine Connection
[Main Instruction]
The Application encountered an error while attempting to change the state of 'w2008-x64-core'.
[Content]
'w2008-x64-core' failed to start.
Microsoft Synthetic Ethernet Port (Instance ID {7618779D-B062-48F0-B59C-00544F914653}): Failed to Power On with Error 'La ressource ou le périphérique réseau spécifié n'est plus disponible.'
[Expanded Information]
'w2008-x64-core' failed to start. (VMID 59A55F8F-E60A-4F9D-9C04-3C8951DD9FC1)
'w2008-x64-core' Microsoft Synthetic Ethernet Port (Instance ID {7618779D-B062-48F0-B59C-00544F914653}): Failed to Power On with Error 'La ressource ou le périphérique réseau spécifié n'est plus disponible.' (0x80070037). (VMID 59A55F8F-E60A-4F9D-9C04-3C8951DD9FC1)
Microsoft Windows
[Main Instruction]
Virtual Machine Worker Process a cessé de fonctionner
[Content]
Windows peut rechercher une solution au problème en ligne.
I don't understand the problem ?!
↧
Accessing Hyper-V VMs from external network/internet
Hello,
This is my first post. Welcome everyone.
I am looking for solution to be able to reach my Hyper-V server VM from external network/internet. In details:
- Hyper-V server - 192.168.1.3
- I want to reach virtual machines from internet, from public IP, and I want to be able to work with them from outside of my home
I guess that I should configure ports forwarding on my home router. Then connect to Hyper-V server using Hyper-V Manager and my public IP address at home. But how to do that? Which ports should be forwarded?
Thanks,
zanahoria13
↧
Where is Hyper-V Server 2019?
Where is Hyper-V Server 2019? Months have gone by and its still not available.
↧
↧
USB device in HyperV
HI Team, I have a software package called U8 that uses a USB device as a license key. Using a 2019 Server Standard Host and a 2016 Windows Standard as the VM, can the VM access the USB device on the physical machine...?
Thanks in advance for advice.
Tom Karpowski...
↧
Hyper-v Virtual Machine Connection Window shows Black Screen
today suddenly when i start hyper-v guest vm it loading ok no boot error. but Alt+Ctrl_Del screen not show. only show the black screen, move is moving in the vm screen, i also click the vm tool bar and press Alt+Ctrl+Del but no effect. i turn off vm, and one by one select safe mode and try all option but no effect.
I Tried to get the the image from the back but the same problem.
I tried to attached the image with a new VM but the same problem
please help to resolve this issue.
Regard
↧
Hyper-v cluster with two network adapter
Hi
We are planning to create Hyper-v cluster on brand new dell servers, the physical server comes with 4 port network adapters, 2 ports comes with a gigabit network and the other 2 ports comes with 10 G but Unfortunately the 10 g adapter is not function
so my question is can i achieve the cluster with only two network adpater 1g, because i read some articles that shows that i've to create 4 network adapter for each service (Management-ISCSI-Cluster-Live Migration).
I think about creating NIC teaming on both gigabit adapters then creates a four virtual switches for above networks, does this configuration correct if not please help me to do the best practice solution.
Thanks
↧