Virtual Server Re-starts every couple of days without any reason
Hi,We are using Hyper-V on Windows Server 2012. We have three virtual servers defined under Hyper-V. One of these is our terminal server and it is re-starting every couple of days without any reason. I...
View ArticleHyper-V and Display resolution
Hi there, I am trying to increase the display resolution to 1600x1050 for my virual server (Hyper-v), but the max I can get is 1280x1024.I installed the Integration services and all the updates for the...
View Article2012 R2 logical switch VMQ
Hey,We are trying to set the correct settings for VMQ on 2012 R2 on our physical servers.Switch settings, Independent mode, Dynamic. CPU, HT 2x12, lp 48.Receive queues is 15 per port, 2x10GB.Per...
View ArticleHow to determine the Host a VM runs on, if VM is 2012
Morning allHyperV host on Win2012 (standard, not R2), guest is the same.Time was, you could query HKLM\SOFTWARE\Microsoft\Virtual Machine\Guest\Parameters\PhysicalHostName on a VM to find out the name...
View ArticleInstall in Virtual Machine from Host machine
I've installed Hyper-V service on my windows 8.1 64 bit laptop and create a virtual server ofWindows 2012 server .Now I need to know how can I install other software like SQL Server ,.... on my virtual...
View ArticleInstall of Hyper-V role fails Server 2012 Standard
Hi All,I have been trying to enable the Hyper-V role in server 2012R2 standard, but on restarting it fails to install, then recovers back to how it was. I've looked through the logs and found the...
View ArticleProblems with PVLAN
I have setup a Isolated network with a primary and secondary vlan using Server 2012 R2 hosts.Everything works ok on the virtual Machines when settings are published.But after a restart the isolated...
View ArticleHyper-V Question -- Running Hyper-V or VMWare on a Windows Virtual Server
So my research tells me there likely is not a way to do this, but I think someone must have run into it before or there has been a previous need.We have recently had two Windows Server 2012 R2 Standard...
View ArticleNeed to enable Internet Connection Sharing (ICS) in Hyper-V Server 2012 core
Hi, I am now to Hyper-V Server Core. Because my network is restricted to one IP address, which is the Hyper-V's host IP, guest VMs need to have "Internal network", sharing the host network.I need to...
View ArticleGuest on Hyper-V Host hung up at logging off, have no access to server
I have a Hyper-V guest that is hung up at logging off and have no access to that server?
View Articleconvert server core to full/minimal interface GUI
Hi, We have a dell server running Microsoft Hyper-V Server 2012 R2 core edition and we are planning to take backup of VM's to a tape drive (Dell PowerEdge LTO-6 SAS drive). But the core edition is not...
View ArticleGeneration 2 vms pxe boot
Hi All,can anyone please confirm if pxe boot works with gen 2 vms in hyperv? I have wds installed in standalone mode. When ever I create new gen 2 vm, it takes ip, downloads some file and it says...
View ArticleHyper V on Win 8.1 Pro - can you use a wireless nic or does it need to be...
On my desktop with win 8.1 pro i installed win 8.1 pro on hyper v as we are going over this chapter in school. i got it loaded just fine but when i start it up I have no internet on the virtual 8.1 pro...
View ArticleVM communication fail on HP broadcom network adapter
Hi All,I have HP DL380 servers with Broadcom network adapters. I have successfully created the team and selectDynamic as the load balancing mode. This team has selected for the virtual switch. My VMs...
View ArticleConnect thin clients to Hyper-V virtual machines
I want to run several VMs on hyper-v and then connect thin clients to each VMs.is there any way to boot thin clients from Hyper-v virtual machines?thank's
View ArticleHyper-V replaced my OS?
Long story short, I'm an IT major at college, and this is my first year. We're learning DOS on MSVPC, but since I have 8.1, I have to use hyper-v. I downloaded it, and it installed whilst I was eating...
View Articlevery slow connection to VM from Hyper-V manager on Windows 8
windows 8; Client Hyper-V enabled; added Hyper-V host (server 2012)Take a long time to connect to VM.Another bad symptom: when open HV Manager, local host appears immediately but added previously...
View ArticleCSV Online (No Access)
Hi everyone, I'm having a problem that have been driving me crazy for weeks now.I had 4 servers in Hyperv core 2008R2 connected with a dell equallogic.I upgraded to 2012r2 hyperv core and I used the...
View ArticleMy location is at INDONESIA but planning to use the SSD Hosting from U.S ....
What is the speed gap if i USE the SSD Hosting from Indonesia to compare with SSD Hosting from U.S?
View Article2012 R2 RemoteFX 3D Video Adapter Greyed Out
I am running a home Server with 2012 R2 with the Hyper-V role installed, with about 5 Windows 8.1 VM's. I'm trying to get RemoteFX working, here's my hardware config:E5-4610 Processor (Supports...
View Article