Hi!
We have the following hardware.
- 2 physical servers with 4x1GB nic and 2xHBA (2 ports)
- 1 SAN box
The 2 physical servers have internal disks that have HyperV 2012 installed. We added a LUN for virtual machine storage and one LUN for Witness disk. We installed failover cluster feature, and added the LUN for CSV so now the LUN is located under C:\clusterStorage on both hosts, and the other disk is located as a Witnessdisk (this witnessdisk have a driveletter so i can see it in explorer, should i remove the drive letter). We configured two teams, 2x1 nic called PRODUCTION and 2x1 nic called for ADMIN. The production network is the network that the virtual machines uses, and the admin is for connection to the hyperv hosts.
So im wondering if we should configure the network different, I have seen people say that you should have a own live migration network, how should we configure this ? If im not wrong, we configure this network and just check that under Networks>Live Migration Settings. My next question is then, what about this Heartbeat, where does this come in, is this hidden in some network settings..:)
Since we have a SAN, I have also looked at Virtual san, but if im not wrong this is used for example if I have a virtual machine that wants to connect directly to a LUN i can add a virtual hba right ?
Please advice in this configuration, and thanks for answers.
Thanks for answers
/Regards Andreas