Hyper-V 3.0 Cluster Network Questions

Hi,

I read many documents about Windows 2012 Server/Hyper-V networking, but not know best practice for full redundant hardware.

f.e.  http://blogs.technet.com/b/keithmayer/archive/2012/12/12/step-by-step-building-a-free-hyper-v-server-2012-cluster-part-1-of-2.aspx

I prepare setup 3 node cluster on WS2012/Hyper-V3 and I have full redundant infrastructure.

Each server have 10 NIC,

NIC1 is connected to iSCSI_Switch1/ NIC2 is connected to iSCSI_Switch2

NIC3..6 is connected to IP_Switch1/ NIC7..10 is connected to iSCSI_Switch2

and for cluster I have:

iSCSI network (I set IP 10.10.10.1 for NIC1 and 10.10.10.2 for NIC and configure MPIO) - OK

Management network (NIC3+NIC7 in team) - OK

Live Migration Network (NIC4+NIC8 in team) - OK

Heartbeat/CSV Network (NIC5+NIC9 in team) - ?Is recomended this network in team ?

VM Network (NIC6+NIC10) in team ???, ports on switches for this NICs is trunk ports, team is not compatible with SR-IOV ???

How configure VM network redundant and with SR-IOV support for this cluster setup ?

In this network is many VMs in diferent VLANs.

Thanks,

SnakeAG