Remote access via vmconnect 6.3

October 28, 2015, 11:38 am

≫ Next: Can not export VM from Hyper-V host to the network share folder?!

≪ Previous: Interrupted VM stuck

$

0

0

I am trying to create a desktop link to a specific vm within the Hyper-V (Server 2012r2).  The local machine is Windows 10.  I have it working to the point that if I run vmconnect 6.3 from either a desktop shortcut or a command line (neither with the usual parameters as to the server or vm) it is fine, but it shows the whole list of vms available.  But, when I add the <server> and <vm> parameters to either to limit it and go directly where needed, it errors with:

"An error occured when trying to register events for 'TargetVM'.  To fix the problem, restart the virtual machine. If that does not resolve the problem, restart the Virtual Machine Management service, and check the Windows Firewall.

RPC server unavailable. Unable to establish communication between 'Hyper-V-Server' and 'LocalMachine'."

Again, when run without the parameters, it is fine and connects to the machine when selected from the list.  Any ideas?

---

Can not export VM from Hyper-V host to the network share folder?!

May 5, 2013, 9:37 pm

≫ Next: hyper-v issue: Mouse pointer invisible in Linux Mint 17 (run in hyper-v of windows 10)

≪ Previous: Remote access via vmconnect 6.3

$

0

0

Hi there,

I’m trying to export VM from our ‘old’ Hyper-V 2008 R2 server onto the ‘new’ 2012 one. Both Hyper-V hosts are in the same Active Directory domain. Since core editions don't have GUI I’m using Hyper-V Manager console on my workstation (Client1).

As soon as I click ‘export’ button I have windows popup immediately with the error message: “Failed to create export directory… (0x80070005)”?!

I have setup appropriate share and NTFS permission as recommended by this post: “Error 0x80070005 when exporting Hyper-V VMs over the Network” (http://support.microsoft.com/kb/2008849). I even gave Client1 the same permission but still have the same error message?! From Client1 or Server1 I can connect to the \\Server65\Export$ folder, can copy/delete/create folders and files without any problems. What I have missed?! Please help, thanks.

hyper-v issue: Mouse pointer invisible in Linux Mint 17 (run in hyper-v of windows 10)

November 4, 2015, 4:08 am

≫ Next: Hi Hyper v i got delete checkpoint before i had copied all backup from the file

≪ Previous: Can not export VM from Hyper-V host to the network share folder?!

$

0

0

Hi everyone:

    my problem is, after I installed the Linux mint 17 in windows 10 hyper-v, the mouse was invisible in the guest OS (Linux Mint 17). While the mouse really works, I can click the buttons in the guest OS, it's just invisible. anyone know what happened? I've tried to download the Hyper-v Linux integration services and tried to install it in Linux Mint and failed to do it. The setting of hyper-v shows that all the "integration services" are offered except the "guest services".

Hi Hyper v i got delete checkpoint before i had copied all backup from the file

August 15, 2016, 7:33 am

≫ Next: Can't Install Windows 10 1607 virtual machine Guest on Server 2008 R2 Host

≪ Previous: hyper-v issue: Mouse pointer invisible in Linux Mint 17 (run in hyper-v of windows 10)

$

0

0

Hi Hyper v i got delete VM checkpoint before i had copied all backup from the file

Now i have 4 files one main 3 checkpoint files. Is there anyone help to me fix it? or tell me how to fix?

I can pay for fixing it. 

Can't Install Windows 10 1607 virtual machine Guest on Server 2008 R2 Host

August 5, 2016, 10:06 pm

≫ Next: Virtual machine on hyperv 2012r2 backup problem

≪ Previous: Hi Hyper v i got delete checkpoint before i had copied all backup from the file

$

0

0

Trying to install the new Windows 10 1607 Enterprise OS as a virtual Machine using Hyper V on a Server 2008 R2 Host.

When I start the installer I get the Windows logo for 5 seconds.

Then the screen goes blank / black.

I would usually expect to see the Windows Installer options to select the Installation Language, Region and Keyboard settings. But I just see a black screen.

I get the following errors in the event viewer. Application and Services Logs -> Microsoft -> Windows -> Hyper-V-Worker -> Admin

Event ID: 23014

Device 'Microsoft Synthetic Display Controller' in 'TESTWINDOWS10' is loaded but has a different version from the server. Server version 3.0 Client version 3.5 (Virtual machine ID 6C2F809F-69A0-4FED-A099-B1F64C57AD79). The device will work, but this is an unsupported configuration. This means that technical support will not be provided until this problem is resolved. To fix this problem, upgrade the integration services. To upgrade, connect to the virtual machine and select Insert Integration Services Setup Disk from the Action menu.

Event ID: 12540

'TESTWINDOWS10' device Microsoft Synthetic Display Controller experienced a protocol error indicative of a deep system problem. (Virtual machine ID 6C2F809F-69A0-4FED-A099-B1F64C57AD79)

Event ID: 11902

'TESTWINDOWS10' (Device 'Microsoft Synthetic Display Controller'): a unrecoverable internal error has occurred. (Virtual machine ID 6C2F809F-69A0-4FED-A099-B1F64C57AD79)

Anybody know how to fix this?

I have lodged a case with Microsoft Support.

Anybody else have this issue?

Virtual machine on hyperv 2012r2 backup problem

March 19, 2016, 10:05 am

≫ Next: VhdTool or any other tool to create fixed size VHDs faster

≪ Previous: Can't Install Windows 10 1607 virtual machine Guest on Server 2008 R2 Host

$

0

0

Hi there.

We have Hyper-V on 2012 r2 HOST.

Virtual machine is also on 2012 r2 OS with Exchange EDGE 2013 role.
When we wish to make backup with VEEAM BACKUP AND REPLICATION (version 8 + update 3) we recieve an error.

3/19/2016 12:08:13 PM :: Unable to create snapshot (Microsoft Software Shadow Copy provider 1.0) (mode: Hyper-V child partition snapshot). Details: Writer 'Microsoft Hyper-V VSS Writer' is failed at 'VSS_WS_FAILED_AT_PREPARE_SNAPSHOT'.
The writer experienced a transient error.  If the backup process is retried,
the error may not reoccur.
--tr:Failed to verify writers state.
--tr:Failed to perform pre-backup tasks.

3/19/2016 12:08:34 PM :: Make sure VM does not have 'iSCSI Software Target Storage Provider' feature installed.

3/19/2016 12:08:34 PM :: Retrying snapshot creation attempt (Writer 'Microsoft Hyper-V VSS Writer' is failed at 'VSS_WS_FAILED_AT_PREPARE_SNAPSHOT'.
The writer experienced a transient error.  If the backup process is retried,
the error may not reoccur.
--tr:Failed to verify writers state.
--tr:Failed to perform pre-backup tasks.)

Any hints how to solve this guys?

With best regards

---

bostjanc

VhdTool or any other tool to create fixed size VHDs faster

June 25, 2014, 8:05 am

≫ Next: Hyper-V on windows server 2008 R2

≪ Previous: Virtual machine on hyperv 2012r2 backup problem

$

0

0

Hi Experts,

I tried to convert a dynamic VHD to Fixed size VHD. It is taking very long for Creation/Conversion of VHDs of size 250GB or more.

I tried VhdTool from http://code.msdn.microsoft.com/vhdtool

This tool is creating VHD files very fast.

The above link has been retired now.

Is this tool MS proprietary? Is there any license required for using this Tool?
and can I use this tool in my Hyper-V VM?

Any other tools suggested by Microsoft for Creating/Converting VHDs?

Thanks in advance,

Saleem

Hyper-V on windows server 2008 R2

August 15, 2016, 7:37 pm

≫ Next: Limited Unidentified Network

≪ Previous: VhdTool or any other tool to create fixed size VHDs faster

$

0

0

Hi Team MS Support .I Ask a question about Hyper-V for windows server 2008 R2 , I run Hyper-v. I see problem. thsi is Error when open or run Hyper-V  ..,,Help me ? You can recommend about Troubleshooting kee me .

The application encountered an error while attempting to change the state of 'Test'

'Test'could not initialize.

An attempt to initialize VM saved state failed. (Virtual machine ID 11A081F2-1FD64895-AE65-F5F3A71D7DA1)

'Test' could not create or access saved state file

C:\ProgramData\Microsooft\Windows\Hyper-V\Virtual Machines\11.....\11A081F2-1FD64895-AE65-F5F3A71D7DA1.vsv.

(Virtual machine ID 11A081F2-1FD64895-AE65-F5F3A71D7DA1)

---

Limited Unidentified Network

August 16, 2016, 12:52 pm

≫ Next: Windows server 2012 R2 Single Hyper-v Virtual machine configuration

≪ Previous: Hyper-V on windows server 2008 R2

$

0

0

I have Windows Server 2012 R2 and I just created a VM with Hyper-V. In the Virtual Switch Manager, I created two switches: one external VM switch and one internal VM switch. The external VM switch is connected to the NIC1 on my physical server which is also the port that has the ethernet connected into. Any suggestions?

A little backstory that may be useful. I have one old DC, lets call it DC1. I am in the process of migrating over to DC2 (which is the server running windows server 2012 R2). I have so far migrated ADDS, DHCP, DNS, IIS. I turned off DHCP on DC2 because it was causing some conflicts. Would this cause any issues as to why I'm not getting connections? 

Windows server 2012 R2 Single Hyper-v Virtual machine configuration

August 16, 2016, 1:00 pm

≫ Next: Hyper-V and ECC memory on Skylake chipset

≪ Previous: Limited Unidentified Network

$

0

0

Hi all,

I found many articles about optimum solutions for complicated Hyper-v scenarios, but I couldn't find any for very simple single Hyper-v Virtual machine configuration. The Physical host is Windows server 2012 R2 with just one hyper-v role and 2 gigabit NICs , 2 RAID1 HDDs, and one 6 core Xeon processor. The guest will be the same OS and I need maximum resources to be used by it. SQL Server 2012 will be installed on the guest.

Any comment,suggestion is appreciated. 

Hyper-V and ECC memory on Skylake chipset

August 4, 2016, 11:19 am

≫ Next: 0x0000003B BSOD System_Service_Exception rdpdr.sys - 2008 R2 SP1

≪ Previous: Windows server 2012 R2 Single Hyper-v Virtual machine configuration

$

0

0

Hello

I have skylake c236 motherboard + xeon processor + ECC UDIMM memory

 

I run "best practices analyzer" scan on hyper-v role on windows server 2012r2

And got error

 

Title:Use RAM that provides error correction
Severity Error
Problem: The RAM in use on this computer is not error-correcting (ECC) RAM.
Impact:Microsoft does not support  on computers without error-correcting RAM.

 

Then I tryed AIDA64 latest beta (from this topic https://forums.aida6...d-skylake-imc/)

 

DMI

[ Memory Arrays / System Memory ]  
   Memory Array Properties:  
   Location   Motherboard  
   Memory Array Function   System Memory  
   Error Correction   Single-bit ECC  
   Max. Memory Capacity   64 GB  
   Memory Devices   4  
[ Memory Devices / DIMM_A1 ]  
   Memory Device Properties:  
   Form Factor   DIMM  
   Type   DDR4  
   Type Detail   Synchronous  
   Size   16 GB  
   Max. Clock Speed   2133 MHz  
   Current Clock Speed   2133 MHz  
   Total Width   64-bit  (my note, this value must be 72-bit for ECC module)
   Data Width   64-bit  
   Ranks   2  

 

   SPD
 [ DIMM1: Samsung M391A2K43BB1-CPB ]  
     Memory Module Properties:  
   Module Name   Samsung M391A2K43BB1-CPB  
   Serial Number   322136A0h (2687902002)  
   Manufacture Date   Week 15 / 2016  
   Module Size   16 GB (2 ranks, 16 banks)  
   Module Type   Unbuffered DIMM  
   Memory Type   DDR4 SDRAM  
   Memory Speed   DDR4-2133 (1066 MHz)  
   Module Width   72 bit  
   Module Voltage   1.2 V  
   Error Detection Method   ECC  
   DRAM Manufacturer   Samsung  
   DRAM Stepping   00h  
   SDRAM Die Count   1  

 

Chipset
 [ North Bridge: Intel Skylake-S WS IMC ]  
      Error Correction:  
   ECC   Supported, Enabled  
   ChipKill ECC   Not Supported  
   RAID   Not Supported  
   ECC Scrubbing   Not Supported  

 

Please answer, ECC is full enabled? Why windows server thinks it is not enabled?

0x0000003B BSOD System_Service_Exception rdpdr.sys - 2008 R2 SP1

September 22, 2015, 3:36 am

≫ Next: Hyper-V Virtual Machine Different Sates

≪ Previous: Hyper-V and ECC memory on Skylake chipset

$

0

0

I have several servers that crash when I log in to them, physical & HyperV VMs. RDPDR.SYS looks to be causing the issue.

Anybody know of a hotfix that may cure this problem?

Windows 2008 R2 Web Server SP1 running on Dell hardware.

Hyper-V Virtual Machine Different Sates

August 16, 2016, 10:24 pm

≫ Next: Is there any module available in Gallery for converting a powershell CSV output to rich Excel format (.xlsx/.xls).

≪ Previous: 0x0000003B BSOD System_Service_Exception rdpdr.sys - 2008 R2 SP1

$

0

0

Hello ,

Is there any document or URL explaining Different states of Hyper-V VM .

For example , Running , Suspend , Saved , Saved-Critical , Resuming .... and many more.

Is there any detailed Explanation for each different state of Hyper-V VM

Thanks

---

Thanks , Prakash ,Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Is there any module available in Gallery for converting a powershell CSV output to rich Excel format (.xlsx/.xls).

August 17, 2016, 4:56 am

≫ Next: Deploying Hyper V Replication in remote site with different network segment

≪ Previous: Hyper-V Virtual Machine Different Sates

$

0

0

need to create a excel report on Infrastructure roles objects and parameters using Powershell scripts.

Your advise are highly welcome.

Regards

Roushan

Deploying Hyper V Replication in remote site with different network segment

August 3, 2016, 11:49 am

≫ Next: Find out when a VM was deleted and who did it

≪ Previous: Is there any module available in Gallery for converting a powershell CSV output to rich Excel format (.xlsx/.xls).

$

0

0

Hi everyone,

Curious about something.

I am familiar with Hyper V replication in 2012.

I currently have it set up to replication some VMs to different servers on my LAN.

What I would like to do is replicate these VMs to our remote site for disaster recovery situations.

My network runs on 192.xxx and the remote site is a 10.1.xxx.xxx network. Both networks are in the same domain.

What can I do to use the remote site as disaster recovery site, but be able to bring up the server and connect to it, even though it is on a different segment?

---

Find out when a VM was deleted and who did it

August 17, 2016, 8:55 am

≫ Next: Windows Server 2012 R2 consistent BSOD PNP_Detected_Fatal_Error 0x000000ca - ntoskrnl.exe+569531

≪ Previous: Deploying Hyper V Replication in remote site with different network segment

$

0

0

Find out when a VM was deleted and who did it

Windows Server 2012 R2 consistent BSOD PNP_Detected_Fatal_Error 0x000000ca - ntoskrnl.exe+569531

August 17, 2016, 11:21 am

≫ Next: Error after creating win 7 VM machine in host server

≪ Previous: Find out when a VM was deleted and who did it

$

0

0

I have a Dell PowerEdge R710 that has been experiencing BSOD crashes at least once a day, usually multiple times. I have windows 2012 R2 installed. The dump files haven’t been much help but I’ll link to them below.

Bug Check String – PNP_DETECTED_FATAL_ERROR

Bug Check Code – 0x000000ca

Caused by driver – ntoskrnl.exe

Caused by address – ntoskrnl.exe +14e2a0

Dump file -  https://www.dropbox.com/s/7tlzcz5zxu3if53/080916-24156-01.dmp?dl=0

Error after creating win 7 VM machine in host server

August 15, 2016, 11:43 pm

≫ Next: What clients can I add to Hyper-V

≪ Previous: Windows Server 2012 R2 consistent BSOD PNP_Detected_Fatal_Error 0x000000ca - ntoskrnl.exe+569531

$

0

0

I using Hyper-V Manager Version: 6.3.9600.16384 from last 1 year, there are lots of VM configured on it.

recently i have created one more VM with  windows 7 OS, after 1 day my VM Host server network suddenly got down

then i have restarted network service

after that i checked the event log and found below error

A storage device in 'HOSTNAME' loaded but has a different version from the server.  Server version 6.0  Client version 4.2 (Virtual machine ID 8EA16F07-F4E0-4681-818E-29B922194C9C). The device will work, but this is an unsupported configuration. This means that technical support will not be provided until this problem is resolved. To fix this problem, upgrade the integration services. To upgrade, connect to the virtual machine and select Insert Integration Services Setup Disk from the Action menu.

Please provide solution ASAP

What clients can I add to Hyper-V

August 17, 2016, 1:44 pm

≫ Next: Hyper-V 2012 Integration Service issue

≪ Previous: Error after creating win 7 VM machine in host server

$

0

0

Hello, I am looking to take one of my standalone workstations in my work and re-create it as a VM in hyper-v. 

My question is whether or not I can use windows 7 pro in Hyper-V? Do I need to use a enterprise version or server version or will a standard pro license work?

Hyper-V 2012 Integration Service issue

July 27, 2016, 3:44 am

≫ Next: Hyper-V Path Not Found while Enabling Replication

≪ Previous: What clients can I add to Hyper-V

$

0

0

Hi Everyone

I have Hyper-V environment consist of 15 windows 2012 Datacenter.

I have issues in the environment, so I run the Cluster Validation test, I get errors in Validate Hyper-V Integration Services Version.

Error:

The following virtual machines are running integration services that does not match the host computer (and a list of VM’s).

Then I run a PowerShell command

 (Get-ClusterGroup | Get-VM | Format-Table Name, IntegrationServicesVersion)

The result was different version of integration services:

TESTdc2                                                             6.3.9600.16384                                                           

TETfnet                                                              6.2.9200.21919                                                           

TESTNAE2                                                          6.2.9200.16433                                                           

TEST-CE1                                                             6.2.9200.16433                                                            

TEST-CE2                                                             6.2.9200.16433                                                           

VAOX                                                                  6.1.7601.17514        

Then I checked all 15 host, found that they have the same integration service version 6.2.9200.17164, all hosts updated.

Now what I have to do, to fix this error.